AUTOGARD torque limiter
Serviceliste
-
AUTOGARD torque limiter series 400Listenelement 1
RBW Antriebstechnik GmbH is a REXNORD authorized dealer for AUTOGARD products. The use of this non-destructive coupling system is recommended when the highest demands are placed on the shutdown accuracy in connection with a quick restart. They are used, for example, on conveyor belt drives in opencast mines, pump applications, in steelworks and paper mills, as well as on crushers, to name just a few examples. The AUTOGARD series 400 torque limiter are available in different versions: Model 402 for direct assembly of drive elements such as chain wheels, belt pulleys or similar - Model 403: with universal mounting flange, e.g. for cardan shaft attachment - Model 404: with rigid hub, for applications with a radially guided shaft - Model 405: with flanged metal multi-plate coupling, single or double cardanic - Model 406: with flanged elastic coupling Ask us, we have a solution for most applications!
-
AUTOGARD safety coupling series 800Listenelement 2AUTOGARD safety couplings of the 820 series are used in steelworks, in crushing systems, in tunnel boring machines, in systems that have to safely transmit high and extremely high torques. This coupling is based on a modular design in which the disengaging modules are arranged on a flange on the same circumference. The disengaging force multiplied by the lever arm results in the disengaging torque of this clutch system. If a module is disengaged, the clutch goes into freewheel. When the overload has been eliminated, this coupling can be easily engaged. To do this, the coupling hubs are aligned and then with a small blow with the rubber mallet on the head of the disengaging modules, they are re-engaged. The previously set torque is now reached again. This modular design enables unlimited designs and torques of 1 million Nm and more. The AUTOGARD safety couplings series 820 are available in different versions: Type 1: shaft - shaft - connection with elastic pin coupling Type 2: shaft - shaft - connection with elastic Samiflex coupling Type 3: shaft - shaft - connection with torsionally rigid, double-cardanic metal plate coupling Type 4: Shaft - shaft - connection with double-cardanic gear coupling Type 6: For flanging a cardan shaft Ask us, we have a solution for most applications!
-
AUTOGARD torque limiter series XGListenelement 3The Autogard XG series is a new development. XG stands for extruder generation. This coupling system was specially developed for use in twin-screw extruders. Because of their power density (high torque on the smallest center distance), twin-shaft extruder gearboxes are very sensitive to overload. Nevertheless, one would like to use the gearbox almost to its performance limit. The solution: An Autogard series XG safety coupling is placed between the motor and the gearbox; this reliably protects the gearbox and system from sudden overloads. If there is an overload after all: the clutch can be manually re-engaged using the simplest means. The Autogard XG series is a load-shedding clutch, after an overload the system goes into freewheel. Torques up to 6900 Nm are possible. The AUTOGARD safety couplings XG series are available in two versions: Model XG - M: with flanged elastic coupling Model XG - R: with flanged elastic coupling, but radially expandable Ask us, we have one for most applications Solution!